Spirax Sarco S1 Ductile Iron Separators

The Spirax Sarco S1 Separator, in ductile iron, is a baffled separator for removing liquid droplets from steam, compressed air or gas systems. Fitted with an adiabatic jacket to improve its working performance.

(an official) standard

This product complies with the European Pressure Equipment Directive 97/23/EC.

Certification

This product can provide "test report". Note: If you need a certificate, please specify when ordering.

Sizes and pipe connections

½", ¾" and 1" threaded connections BSP or NPT.

restrictive condition

Valve Body Design	PN16
PMA Maximum Allowable Pressure	16 bar g @ 100 °C
TMA Maximum Allowable Temperature	300 °C @ 11 bar g
Minimum permissible temperature	0 °C
PMO Maximum Working Pressure	13.8 bar g
TMO Maximum Operating Temperature	200 °C @ 13.8 bar g
Minimum working temperature	0 °C
Note: For lower operating temperatures, please consult Spirax Sarco.
Design maximum cold hydraulic test pressure	24 bar g

material (that sth is made of)

Item	Part	material (that sth is made of)
1	valve body	Ductile iron DIN 1693 Gr.GGG 40
2	bonnets	Ductile iron DIN 1693 Gr.GGG 40
3	gaskets	Laminated graphite
4	bolt (male component of nut and bolt)	Steel BS1768 Gr 5
5	bushing	½", ¾": steel; 1": steel ASTM A105
6	crossbar	Cast iron DIN 1691 Gr. GG20

Weight and volume (approximate)

caliber	weights	capacity
½"	2.7 kg	0.53 liters
¾"	4.2 kg	1.13 liters
1"	8.1 kg	3.15 liters

Installation and maintenance

Refer to the Installation and Maintenance Guide (IM-P023-55) supplied with the product for detailed information.
Installed on horizontal piping with the discharge port pointing vertically downward.
Note:To ensure rapid discharge of the separated liquid, a suitable trap should be connected to the drain port. Please consult Spirax Sarco.

deal with

This product is recyclable and has no ecological problems when disposed of properly.

Ordering Instructions

Example:1-¾" BSP Spirax Sarco S1 vapor separator with ductile iron body.

Available Models

Available types	SKU
1/2" S1	230200
3/4" S1	230300
1" S1	230400

Technical Data Download

S1-TI-P023-02-EN.pdf
TI-P023-02-Chinese.pdf