Spirax Sarco FTC32 (DN15 and DN20) Carbon Steel Float® Steam Traps

Spirax Sarco Spirax Sarco FTC32 (DN15 and DN20) carbon steel float steam traps with built-in automatic air venting are ideal for overcoming pressure and load fluctuations to efficiently remove condensate in process applications. Standard connection is horizontal right to left (viewed from the bottom of the valve).

Model and Maximum Differential Pressure

Sizes and pipe connections

• ½" and ¾" threaded connections BSP and NPT
• ½" and ¾" Socket Welding BS 3799 Class 3000 and ANSI B16.11 Class 3000
• DN15 and DN20 flanges EN 1092 PN40, ANSI B16.5 Class 150 and 300, JIS/KS 20K and 30K

selectable

• Provide horizontal connections with flow direction from left to right (FTC32(L-R)) and vertical connections (both up and down) with model number FTC32V.
• Trap body materials are available in ASTM or DIN standards.
• An optional manually adjustable needle valve can be installed to provide broken steam vapor lock in addition to air venting performance, model FTC32-C.
• An internal strainer and check valve are available for installation, models FTC32X and FTC32CV respectively.

Limitations (ISO 6552)

Note:For lower operating temperatures, please consult Spirax Sarco. After the internal parts have been installed, the test pressure of the trap must not exceed 48 bar, otherwise the internal parts will be damaged.

Scope of work

This product should not be used in specific areas as it may damage the parts inside. *PMO maximum working pressure (recommended) 32 bar g.

Certification

This product can be supplied with a certificate EN 10204 3.1. If a certificate is required, please specify when ordering.

material (that sth is made of)

Note: Some parts are not labeled in the figure.

weights

• ½" and ¾" thread/socket weld: 5.8 kg
• DN15/DN20 flange: 7.4 kg

Ordering Instructions

½" FTC32 Carbon Steel Float Type Steam Trap with built-in automatic air venting device, serviceable or removable, threaded/socket/flange connection (please specify when ordering). With built-in strainer and check valve (optional). This trap can be serviced directly on the pipeline, installed horizontally or vertically. Certificate EN 10204 3.1.B.