SHOPVALVES / Catalog
Product
Spirax Sarco MPC2M/MPC2AM High-Efficiency Compressed Air Filter/Regulator 5043194
High-efficiency compressed air filters/regulators for precise pressure control and high-quality compressed air in pneumatic actuators and general-purpose systems.
Spirax Sarco BT1050 Boiler Blowdown Controller
Spirax Sarco BT1050 boiler blowdown controller is a timer for controlling the bottom blowdown valve. It provides three independently adjustable timers for scheduled blowdown cycles, with valve fault alarms and infrared communication.
Spirax Sarco FTC32-14 DN20 Carbon Steel Float Steam Trap
Spirax Sarco FTC32-14 DN20 carbon steel float steam trap with an internal automatic air vent for efficient condensate removal under fluctuating pressure and load conditions.
Spirax Sarco Fig36 Austenitic Stainless Steel Strainer
Spirax Sarco Fig36 is a flanged, Y-pattern austenitic stainless steel strainer. The standard stainless steel screen has a 0.8mm perforation for DIN15-DN80 and a 1.6mm perforation for DIN100-DN200. Other perforation sizes, mesh counts, and Monel screens are available.
Spirax Sarco Fig34 Carbon Steel Strainer – EN Standard Materials
Spirax Sarco Fig34 is a flanged Y-type carbon steel strainer with EN standard materials, available with stainless steel or Monel alloy screens and optional blowdown or drain valve connections.
Spirax Sarco DP27/DP17 Main Valve Diaphragm
Spirax Sarco DP27 main diaphragm set provides two phosphor bronze diaphragms for pressure regulation across DN15 to DN50 pilot operated reducing valves.
Spirax Sarco TD52M/TD52MLC/TD52MA/TD52MLCA Thermodynamic Steam Traps
Spirax Sarco TD52M series thermodynamic steam traps are stainless steel, repairable units for applications with relatively low condensate loads, such as steam mains. Low-capacity LC models and versions with anti-air-binding discs are available.
GESTRA RK76 PN40 Stainless Steel Wafer Check Valve
GESTRA RK76 is a compact wafer-type non-return check valve for industrial piping systems, designed to prevent reverse flow of liquids, gases, and steam. Its spring-assisted disco design supports flexible installation, low opening pressures, and reliable shutoff across a wide range of industrial applications.
Spirax Sarco TD42S2/TD42S2LC Thermodynamic Steam Traps
Forged steel thermodynamic steam traps with socket-weld connections. TD42S2LC low-capacity models are available in all sizes for steam main and tracer line drainage.
Spirax Sarco FT46 Stainless Steel Float Steam Trap (DN15-DN50)
Spirax Sarco FT46 stainless steel float steam trap for DN15-DN50 applications, with stainless steel internals, an integrated automatic air vent, and flanged connections.
Spirax Sarco UIB30/UIB30H Sealed Inverted Bucket Steam Trap - For Use with Pipeline Connectors
Spirax Sarco UIB30 and UIB30H sealed inverted bucket steam traps can be installed horizontally or vertically, with the body suspended downward and the cover at the top. UIB30H is the high-capacity version. When connected to a suitable pipeline connector, UIB can be removed in-line without disturbing the pipework, reducing system downtime.
Spirax Sarco FT450 3" High-Capacity Float and Thermostatic Steam Trap DN80 66719
Spirax Sarco FT450 3" (DN80) and 4" (DN100) high-capacity float and thermostatic steam traps provide continuous condensate discharge at saturation temperature and remove non-condensable gases through an integrated bimetallic air vent.
Spirax Sarco SDP/DP143/163/G Pilot Seal Assembly for Reducing Valves 0060083
Spirax Sarco SDP/DP143/163/G pilot valve seal assembly (0060083) features a 115 N m tightening torque for pilot sealing in DP series steam pressure reducing valves.
Armstrong CVW40SS Wafer Lift Check Valve
Armstrong CVW40SS wafer lift check valve with an all-stainless-steel construction, PN40 pressure rating, and a -25°C to 425°C operating temperature range for steam, hot water, condensate, oil, and other non-corrosive media.
Spirax Sarco PC10HP Pipeline Connector
Spirax Sarco PC10HP is an ASME Class 600 stainless steel connector for 360° swivel steam traps across DN15 to DN25 lines.
Spirax Sarco BVA310/BVA315/BVA320/BVA325/BVA330/BVA335/BVA340 Pneumatic Actuators
Spirax Sarco BVA300 series pneumatic actuators are designed to operate Spirax Sarco ball valves in a wide range of industrial applications.